Product
Solar Road Stud
Solar Road Stud
Solar Road Stud
Solar Road Stud
Solar Road Stud
Solar Road Stud
Solar Road Stud
Solar Road Stud

Solar Road Stud HA-RS-D1

Compression resistance value of 20 tons, suitable for use in road edging, low price, many years of experience in the use of roads, a combination of active and passive luminescence.
Protection class: IP68
Certificate: CE, ROHS, ISO9001
Warranty: 2 Years
Share With:
Product Introduction
Solar road studs, is a kind of road studs, set along the road surface, for night or rain and fog weather, indicating the direction of the road ahead, by retro-reflective materials, shell, solar panels, LED, control devices. With active light-emitting and passive reflective properties of visual induction, usually used in combination with the marker.
Solar road studs work: during the day, solar panels absorb sunlight, solar energy into electrical energy stored in energy storage devices (batteries or capacitors), at night, the electrical energy in the storage devices automatically converted into light energy (controlled by photoelectric switch), through the LED emits bright light to outline the road, to induce the driver's line of sight.
Product Advantages
01
Reflective sheet adopts two-component epoxy resin glue and shell bonding, good waterproof performance, not easy to fall off.
02
Solar cell protective shell using German Bayer material, UV resistance, high impact resistance.
03
German solar cells, photoelectric conversion rate of 19%.
04
High temperature resistant NiMH battery, 3 years design life.
05
The controller adopts American PIC microcontroller, with stable performance and strong anti-interference ability.
Product Parameters
Body material Hi-pressure Casting Aluminium alloy
Power supply Mono crystalline solar panel 2.5V/0.25W
Battery NI-MH 1.2V/ 600mAh(high temperature resistance);
Lithum battery  3.2V/500MA(made in Japan);
LED Ultra bright diameter 5mm(4pcs or 6pcs)
LED color Red, Yellow, Green, Blue, White
working mode Recharging at day and working automatically at night
Working hours (1).Blinking:140hours for NI-MH battery; 130hours for lithum battery.
(2).Constant:40hours for NI-MH battery; 35hours for lithum battery.
Life span 2years for NI-MH battery;
5years for Lithum battery;
Visual distance >800m
Water proof IP68
Resistance >20T
Size L104*W104*H20mm+40mm  (L4.09"*W4.09"*H0.78"+1.57")
Package:  Without shank: 2pc/box;60pcs/ctn
 With shank: 1pcs/box;  45pcs/ctn;
Carton size  Without shank: 58.5*24.5*18.5cm   (23.03"*9.65"*7.28")
 With shank: 56.5*34.8*23.6cm  (22.24"*13.70"*9.29)
Weight  Without shank: 21kgs/ctn  (46.30bs/ctn)
 With shank: 18.5kgs  (40.79bs/ctn)
Certificate CE; FCC; ROHS;IP68
Product Install
01
Mark the correct installation location and clean it up (generally 3m apart).
02
Pour the glue on the installation location.
03
Clean the bottom of the solar road stud and place it on top.
04
After installation, clean up the spilled glue and debris around, wait for 4-8 hours to activate.
whatsapp
Phone
Email