Product

Solar Road Stud HA-RS-A1

Cast aluminum solar reflective road studs have a pressure resistance value of 25 tons, and the solar cell housing is designed with a descending surface, thus reducing vehicle friction. The area of solar panel is larger than that of general products, and the charging efficiency is 30% higher. Waterproof performance is better, suitable for rainy zone areas. Reflectors are set in from the inside of the shell, so they are not easily damaged and perform well on highways with heavy traffic flow.
Protection class: IP68
Certificate: CE, ROHS, ISO9001
Warranty: 2 Years
Share With:
Product Introduction
Solar road studs, is a kind of road studs, set along the road surface, for night or rain and fog weather, indicating the direction of the road ahead, by retro-reflective materials, shell, solar panels, LED, control devices. With active light-emitting and passive reflective properties of visual induction, usually used in combination with the marker.
Solar road studs work: during the day, solar panels absorb sunlight, solar energy into electrical energy stored in energy storage devices (batteries or capacitors), at night, the electrical energy in the storage devices automatically converted into light energy (controlled by photoelectric switch), through the LED emits bright light to outline the road, to induce the driver's line of sigh.
 
Product Advantages
01
The solar cell shell is made of Japanese PC bulletproof material, with high impact resistance.
02
Reflective sheet embedded installation design, never fall off.
03
Reflective plate U.S. electro-casting mold core, reflective brightness in line with ASTM4280.
04
The United States sun power flexible high-efficiency cell, photoelectric conversion rate of 23%.
05
High temperature lithium iron phosphate power battery, more than 5 years of ultra-long life.
Product Parameters
 
Body material Hi-pressure Casting Aluminium alloy
Power supply Solar panel(mono crystalline 2.5V/0.25W)
Battery NI-MH 1.2V/600mAh ot Lithium battery
LED Ultra bright diameter 5mm;6pcs double side
LED color Red, Yellow, Green, Blue, White
Working mode Blinking or constant(flashing frequency 2Hz,also can be made according to your requirements)
Visual distance >800m
Working hours Fully charge at 8hours and can working 120hours continuously
Water proof IP68
Life span >3years
Load capacity >20T
Size L108mm*W97mm*H25mm  (L4.25"*W3.82"*H0.98")
Packing 2pcs/box;  60pcs/ctn
Carton size 58.5*24.5*18.5cm   (23.03"*9.65*7.28")
Carton weight 21kgs  (46.30bs)

 
Product Install
01
Mark the correct installation location and clean it up (generally 3m apart).
02
Pour the glue on the installation location.
03
Clean the bottom of the solar road stud and place it on top.
04
After installation, clean up the spilled glue and debris around, wait for 4-8
whatsapp
Phone
Email